Ordering Information
| 1 External Diameter | Thread |
| 08 | M8×P1.0 |
| 10 | M10×P1.0 |
| 12 | M12×P1.0 |
| 14 | M14×P1.0 M14×P1.5 |
| 20 | M20×P1.5 |
| 25 | M25×P2.0 |
| 36 | M36×P1.5 |
| 2 Stroke |
| 06 |
| 06 |
| 10 |
| 15 |
| 20 |
| 20,30,50 |
| 25, 30, 50, 80 |
| 80 |
| 3 | Cap | Remark |
| None | Without Cap | Only M08, M10, M12, M14, M2020 Model 해당 |
| B | With Cap | SCA2030~SCA3680 : Standard have Urethane Cap basically. |
| 4 | Damping Constant | Remark |
| 1 | Soft | Deliver the standard type if there is no choice. |
| 2 | Standard | |
| 3 | Hard |
| 5 | Finishing |
| None | Black Oxide Coating M08~M12:Basic Nickel Plating |
| N | Nickel Plating |
Advantage of Non Adjustable Type
| Model | Picture | Stroke | Total Energy | Total Energy per Hour |
Effective Weight |
Impact Force |
| SCA0806 |  |
6 | 2.8 | 6,000 | Less 8 Less 10 |
250 |
| SCA0806B | ||||||
| SCA1006 |  |
6 | 4 | 10,000 | Less 5 Less 8 Less 13 |
630 |
| SCA1006B | ||||||
| SCA1008 | 8 | 5 | 11,000 | Less 6 Less 10 Less 15 |
700 | |
| SCA1008B | ||||||
| SCA1210 |  |
10 | 8 | 14,000 | Less 8 Less 16 |
1,050 |
| SCA1210B | ||||||
| SCA1415 |  |
15 | 15 | 27,000 | Less 7 Less 17 Less 32 |
1,300 |
| SCA1415B | ||||||
| SCA2020 |  |
20 | 30 | 35,000 | Less 10 Less 16 Less 32 |
1,900 |
| SCA2020B | ||||||
| SCA2525 |  |
25 | 80 | 72,000 | Less 25 Less 35 Less 110 |
4,000 |
| SCA2525B | ||||||
| SCA2525F | ||||||
| SCA2525FB |